Crispy Roasted Fingerling Potatoes Recipe - Savory Nothings (2024)

FAQs

Why are my potatoes not getting crispy in the oven? ›

If roasted potatoes lack their crunchy sheen, overcrowding is usually the culprit. Just as overcrowding bacon or mushrooms in a saucepan causes disappointingly mushy results, placing potatoes too close to each other on a baking sheet will prevent them from crisping while they roast.

If you want to make this roast potatoes day before recipe and keep the potatoes crispy, ensure you put them in hot oil before baking them. This will help the potatoes stay crispy. If you're preparing roast potatoes in advance and find they have gone soggy in the fridge.

Do I have to boil potatoes before roasting? Not necessary but this can help get the perfect consistency and crispiness. Make sure you boil them but leave them a bit al dente and they will crisp up perfectly in the oven.

Soaking potatoes in water helps remove excess starch. Excess starch can inhibit the potatoes from cooking evenly as well as creating a gummy or sticky texture on the outside of your potatoes. Cold water is used because hot water would react with the starch activating it, making it harder to separate from the potatoes.

It's simple, and it produces amazing results. Boil chunks of potato until they're just tender, toss them none-too-gently with fat (ideally beef drippings) to rough up their surface, then roast them until they're crisp and crackling. The boiling and roughing-up steps are the real keys.

When the corn starch comes into contact with the hot oil, it forms a barrier that traps moisture within the potato while also developing a crunchy crust. This results in fries that are both tender on the inside and crispy on the outside, mimicking the texture of fries you might find in restaurants.

A: This sure sounds a lot like potatoes that have been stored too long, in too cold of an environment before cooking. When potatoes are held below 41°F for too long a period, the starches convert to sugar and it changes the cooking chemistry.

To have a truly marvellous roast potato, one must simply let the potato dry completely after parboiling, before roasting in extremely hot fat.

Also, be mindful of the oil. Potatoes can react like sponges; too much oil can make your potatoes appear to be soggy. Try placing oil in a spray bottle or using an aerosol to apply the oil to the potatoes. Lastly, ensure that the potatoes are dry before you add the oil.

Neutral, low-cost oil such as vegetable oil, canola oil, safflower oil, peanut oil, corn oil, coconut oil, avocado oil, etc., work well for roasting. These oils have a high smoke point, allowing the potatoes to get very hot to achieve maximum crispiness.

How does Gordon Ramsay make roast potatoes crispy? ›

Once the potatoes have been partially boiled after six minutes, drain them using a colander and shake them while in the colander to fluff the edges up. Next, sprinkle the semolina and shake the potatoes again to make sure they are evenly coated. Then allow the the potatoes to steam dry for five minutes.

The potatoes cook on the inside when you parboil, so the baking time is basically crisping them up to perfection, which we do at a high oven temperature. If the potatoes are raw, when you use a high temperature, the outside of the potatoes will burn before the inside cooks.

Soak the potatoes in cold water to remove the excess starch from the outside of the potato. There are a few reasons why you want to remove that starch (it makes the potatoes burn, it keeps them from crisping up, it turns to sugar) but all you really need to remember is to soak them at least one hour.

The main reasons to cut the potatoes and pre-soak in water are: To allow the excess starches and sugars to be removed from the outer surface of the fry strips AND to keep the potatoes from browning prematurely from exposure to air. Covering in water helps the potato from turning a dark color.

Why use salt water for soaking potatoes? There's moisture naturally found in potatoes, and moisture is drawn to higher concentrations of salt. (This is a process called osmosis.) So, if you put the potatoes in a salt water bath, that will help draw out some of their moisture, resulting in crispier fries.

You don't check the temperature

A temperature between 205F to 212F inside the potatoes mean that they are cooked. If the temperature is below that, the potato may be too hard still inside, and if you go above it, they may become gummy.

Potatoes can react like sponges; too much oil can make your potatoes appear to be soggy. Try placing oil in a spray bottle or using an aerosol to apply the oil to the potatoes. Lastly, ensure that the potatoes are dry before you add the oil.

Soft potatoes may be the result of too little olive oil used (be sure to use the full tablespoon!) or overlapping, crowded potatoes on the sheet pan. Be sure to spread the potatoes out fully so that they all have the best chance of roasting to crispy perfection!

Don't exceed the recommended cooking time because potatoes will continue to cook after they're removed from the oven and the skin will get dry. "Another common mistake is letting the potato rest or cool before cutting. This is not meat and the potato doesn't get better with resting.